The vision camera laser cutting machine is equipped with an automatic feeding system and an automatic image recognition system, which solves the problems of difficult cutting, low efficiency and high labor cost of sublimation printed fabrics, and realizes automatic cutting into rolls of sublimation printed fabrics. Therefore, more and more customers choose to use the vision camera laser cutting machine to cut sublimation printed fabrics for the production of printed jerseys, swimwear, cycling clothes and other printed clothing.

So how to choose the right vision camera laser cutter to make your job easier? There are many factors to consider when choosing the right machine, such as quality, cutting capacity or price. We will continue to update articles on this topic to help you better choose your machine. Now we will show you how to choose the working area of the vision camera laser cutter.

CCD Camera Laser Cutting Machine

CCD Camera Laser Cutting Machine

The vision camera laser cutter first recognizes the image and then cuts. It has 2 modes for identifying images:

The first working mode: when the size of the image to be cut (the size of a single image) is smaller than the working area of the machine, the recognition mode we choose is “only recognize the outer contour of the image, and the contour lines generated must be closed”, This can ensure that the recognized image is the image we need to cut. The specific settings are shown in the figure:

camera-laser-cutting-machine

The second working mode: When the size of the image to be cut (single image) is larger than the working format of the machine, the recognition mode we choose is “identify the outer contour of the image, and the generated contour lines are not required to be closed”. This mode is generally used to cut very long images such as flags. The specific settings are shown in the figure:

vision-camera-laser-cutting-machine

Let’s take an example. The effective processing area of ​​the AMOR 1814 vision camera laser cutting machine is 1800X1400mm. If the length of a single image processed by the customer is less than 1400mm or both are greater than 1400mm, we can all choose AMOR1814, but only to set different working modes.

When it is necessary to cut an image larger than 1400mm and an image smaller than 1400mm at the same time, because the two working modes cannot exist at the same time, we cannot complete the processing on the AMOR1814 vision camera laser cutting machine. This problem is often encountered especially when cutting printed cycling clothing. So is there a solution? The answer is yes, you can choose the AMOR1625 series visual camera laser cutting machine, which can identify and cut the format of 1600X2500mm at one time, which can effectively solve this problem, which is why AMOR has camera laser cutting machines with different working areas.

Sublimation-garment-cutting

Conclusion:
1. When you choose a visual camera laser cutting machine to cut printed clothing, you must ensure that the machine’s recognition and cutting format is larger than the maximum image size on the sublimation printed fabric.
2. When all the image sizes on the printed fabric are larger than the working area of ​​the machine, we can choose the “second working mode” of the machine, such as banner cutting.