Project Description
Product Details:
AMO1390 is the most widely used laser cutting machine, because of its moderate size, small footprint, and the use of pass-through material design. Through the configuration of different power laser tubes, it can satisfy local carving and cutting of large objects. It is a cost-effective machine, and it is also the preferred model for customers to do ordinary engraving and cutting.
Industrial chiller
Adopt closed water circulation design to ensure clean water circulation and prolong the service life of laser tube. With the function of automatic constant temperature, the temperature of the laser tube is controlled at 15-25 degrees when continuously working, which can ensure the machine to work normally for 24 hours even under high temperature environment.
Tip: Please inject pure water and replace it every 7 days.
Taiwan HWIN linear guide
Using Taiwan HWIN high-precision linear guide, high precision, good wear resistance, and ensure smooth laser processing. The steel and slider are imported from Germany or Japan uniformly to ensure the high precision and low noise operation of the laser cutting machine.
High quality, high power laser tube
High-quality laser tube is the guarantee for the long-term work of laser fabric cutting machine. AMOR chooses RECI brand laser tube, the maximum cutting power is 150W, the energy is strong, the performance is stable, and it supports global warranty. Can cut fabrics, textiles, wood, acrylic, KT board, MDF and other materials.
Intelligent operating system
The power and speed of the laser can be arbitrarily set according to different materials to ensure good working results. It can remember the machining trajectory of the machine. Even if the power is cut off during the process, the machine can continue the previous work after the power is restored. Support U disk offline operation without computer control.s.
Scientific wiring
The details represent the high quality of the machine. An electrical engineer with a doctoral degree designed the scientific wiring to ensure that the circuit the machine is operating on is stable, and it also makes the maintenance of the machine more convenient in the later period.
Automatic lifting work platform
The working platform can be automatically raised and lowered (the lifting range can be customized, and the standard configuration is 300mm) to meet the material processing of different heights. The stainless steel screw drive is used to ensure the level of the working platform during the upward and downward movement.
Auto Focus System
The distance from the cutting head to the material can be automatically adjusted to ensure the good processing effect of the laser machine, without manual adjustment of the focal length, which is convenient and intelligent.
Reasonable mechanical structure
AMOR has 8 years of experience in the production of laser machines, and has extensive production experience in the selection of accessories and machine installation. The mechanical structure is reasonable, the operation is smooth, and the quality is stable.
AMO1390 affordable laser cutting machine technical specifications
| Model | AMO1390 |
| Single cut maximum area | 1300mmX900mm |
| Cutting head | Aluminium oxide for lifetime use |
| Machine size | 2150mmX1570mmX1060mm |
| Optical system | Three mirrors, one focusing lens, imported from Singapore, high light reflectivity, good focusing effect, focusing lens focal length 63.5 |
| Laser tube | 60W，80W，100W，130W，150W，180W RECI laser tube,260W,280W,300WYLlaser tube; according to the actual needs of the configuration of different power laser tube, it is recommended that cutting power control within 70%, can effectively extend the life of the laser tube |
| Ammeter | Control between 20-30 |
| Control System | Qiancheng system, supports ultra-format cutting, suitable for continuous cutting of fabrics |
| Support image format | DXF, PLT, AI etc vector file |
| Cutting thickness | Single layer fabric cut |
| Connection | Serial port, support offline operation, USB file |
| Motion Control System | High-speed continuous loop DC stepper motor |
| Storage | 521MB space |
| Adsorption | Vacuum adsorption |
| Exhaust fan power | Bottom exhaust fan：2X0.75KW |
| Fan operating voltage | AC220V/50HZ |
| Machine operating voltage | AC220V/50HZ |
| Best work environment | Temperature 0-40 degrees, humidity 20%-80% RH |
| Cutting speed | 50-650mm/s |
| Acceleration | 2000-4000mm/s |
| Cooling system | Water pump or chiller, according to the power of the laser tube, 80W below the recommended use of water pumps, more than 80W recommended the use of different specifications of the chiller CW3000, CW5200, CW6000, chiller Features: Sealed, industrial grade chiller, can achieve 24 hours of continuous work Internal circulating water can be used for 15-20 days |
| Working platform | Customers choose different cutting platforms according to cutting requirements: blade platform, Honeycomb platform, and can also add up and down lifting functions and rotation auxiliary functions as required. |
| Auxiliary gas | According to different materials, different air blowing rates are used. Generally, it is recommended to use air when cutting wood, but in order to pursue cutting effect when cutting acrylic, the smaller the amount of gas, the better; if the engraving is recommended to select a small air blowing, the engraving effect is better. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
| Material | Laser Cut | Laser Engrave |
| Acrylic (PMMA) | Yes | Yes |
| Anodized Aluminum | NO | Yes |
| Cardboard | Yes | Yes |
| Carpet | Yes | Yes |
| Coated Metals | NO | Yes |
| Ceramic | NO | Yes |
| Cloth | Yes | Yes |
| Composite material | Yes | Yes |
| Cork | Yes | Yes |
| Delrin | Yes | Yes |
| Fabric/Textile | Yes | Yes |
| Fiberglass | Yes | Yes |
| Foam | Yes | Yes |
| Glass | NO | Yes |
| Granite | NO | Yes |
| Plastics | Yes | Yes |
| Leather | Yes | Yes |
| Marble | NO | Yes |
| Matte Board | Yes | Yes |
| MDF | Yes | Yes |
| Mylar | Yes | Yes |
| Painted Metals | NO | Yes |
| Paper | Yes | Yes |
| PET/PETG | Yes | Yes |
| Polyamide (PA) | Yes | Yes |
| Polycarbonate (PC) | Yes | Yes |
| Polyethylene (PE) | Yes | Yes |
| Polyester (PES) | Yes | Yes |
| Polyimide (PI) | Yes | Yes |
| Polyoxymethylene (POM) | Yes | Yes |
| Polypropylene (PP) | Yes | Yes |
| Polystyrene (PS) | Yes | Yes |
| Polyurethane (PUR) | Yes | Yes |
| Polyvinyl chloride (PVC) | Yes | Yes |
| Pressboard | Yes | Yes |
| Rubber | Yes | Yes |
| Silk | Yes | Yes |
| Textile | NO | Yes |
| Velvet | Yes | Yes |
| Veneer | Yes | Yes |
| Wood | Yes | Yes |
The video shows the AMO1390 laser cutter cutting and engraving different materials such as acrylic, wood, glass, foam, and stone.
Customers can choose different power and format according to their processing needs:
Generally, choose the law of laser power: engraving choose low-power laser tube, below 80W, there is better engraving accuracy, the laser beam is relatively fine; cutting proposal to choose to use more than 80W power laser tube, with stronger cutting ability. Of course, if you need to cut also need to sculpt, it is recommended to configure two laser tubes with different powers so that both the cutting and the engraving can be satisfied.
Select the format, according to the maximum size of the customer to cut the material to select the different size of the laser cutting machine, if the processing of the object is relatively small, it is recommended to buy a small laser cutting machine, this will save a lot of purchase costs.
| Machine work site pictures: | |||
 |
 |
 |
 |
| Testimonials: | |||
 |
Awesome!! Thanks AMO, not only because the machines are good, but more importantly they helped me .because my workers left at the time and my order could not be completed. Thank AMO for helping me in time. | ||
 |
AMO asked me to comment on their machine. I thought for a moment. I think they gave me the deepest impression: professionalism. | ||
 |
I was producing sofas in Dubai. I came to China in June 2017 to inspect equipment for automatic cutting. I inspected a lot of manufacturers, but in the end, I chose AMOR because I think they were very professional and they took me to visit a lot of sofa factories. I saw the work of the machine in the sofa factory, really good. | ||