Project Description
AMO1530MT Industrial Fiber Laser Cutting Machine
1000W/1500W/2000W/3000W
≤60m/min
Sheet: 1500 x 3000mm; Tube: Maximum 220mm diameter X 3 m or 6 m length
Fast cutting for metal sheets (carbon steel, stainless steel, aluminum alloy, galvanized sheet, silicon steel, titanium alloy, aluminum zinc sheet, etc.);Dual functional fiber laser cutting machine AMOR1530MT is equipped with tube cutting device, can cut both metal sheets and metal tubes
Machine description：
The fiber laser cutting machine is powerful, and it can cut both metal sheets and metal pipes. One machine meets the two cutting requirements of customers, saves the purchase cost, and has a super high cost performance.
AMOR1530MT fiber laser cutting machine adopts CYPCUT control system and is equipped with professional metal tube cutting software-Tubepro. The pipe cutting system can accommodate metal pipes with a maximum diameter of 220mm, and can cut 3 meters or 6 meters in length at one time, and can also be customized according to customer cutting requirements.
1. Fiber Laser Generator
High-power, high-quality fiber laser generator, good spot quality, stable output power, photoelectric conversion rate as high as 25-30%, service life over 100,000 hours, and a variety of power options.
2. The Machine Bed Adopts Thick Sheet Metal
Sectional welding, thicker sheet metal, improve the stability of the bed and prevent deformation of the bed. The multi-group foot anti-vibration design makes the machine work more stable and meets high-speed operation.
3. Knife-shaped Working Platform
The triangular cutting platform is adapted to effectively reduce the contact area between the metal plate and the platform, effectively preventing the cutting deformation caused by the heat of the platform and the phenomenon that the laser generates a burst point during the cutting process, thereby ensuring the Cutting effect. Each blade has a separate leveling device to ensure good flatness of the cutting width and a good cutting effect.
4. High-quality Guide Rail and Rack Transmission
1. Taiwan PMI guide rail 2. Grinding level Taiwan YYC double rack for Y-axis. 3. Grinding level Taiwan TBI ball screw for Z axis. The machine runs smoothly, with low noise and stable operation.
5. Reducer and Motor
It adopts rack and pinion double servo drive structure, high inertia and strong moment motor, high acceleration, so that the equipment can run at high speed and high precision.
6. Laser Cutting Head with Automatic Lifting Function
The automatic sensor senses the capacitance from the tip of the isolated cutting nozzle to the metal being cut.this data is then fed into the height follower controller. If the metal sheet has wavy surfaces, the focus height follower can ensure the constant distance between the focusing lens and the plane of the metal sheets to be cut, so that consistent cutting quality can be achieved. It can avoid defects caused by wavy metal surfaces and also avoid the damage of the nozzle head.
7.Automatic Metal Pipe Cutting System
The electric motor in the rotating device can freely adjust the speed to meet the requirements of cutting round and square tubes. Double air clamps are installed, which can be used to load and unload pipelines, making work more convenient.
8.High-Power Smoke and Dust Removal System
The high-power dust removal system can be used within the working range of the entire machine, and it can strongly remove the peculiar smell and dust caused by cutting to ensure a good cutting environment.
AMO1530 Industry Fiber Laser Cutting Machine Technical Specifications
| Machine Description: | Fiber 1000W/1500W/2000W/3000W |
| Fiber working size: | Sheet: 1500mm x 3000mm Tube:220mm diameter x 3 meters or 6 meters length |
| Max acceleration : | 1.5G |
| Fiber laser power: | 1000W/1500W/2000W/3000W |
| Max speed: | 60m/min |
| Visual positioning: | Red dot |
| Repeat positioning accuracy: | ±0.02mm |
| Laser Head: | Auto3tech Untouched following system |
| Servo motor: | Japan YASKAWA servo motor/ Panasonic |
| Ball screw: | Taiwan TBI ball Screw |
| Guide rail: | Taiwan PMI guide rail |
| Cooling system: | Industrial chiller |
| Control system: | Auto3tech system/ Cypcut |
| Total power: | ≤6KW |
| Voltage: | 380V/80V/50Hz/60Hz/60A |
| Gross weight: | 4500kgs |
| Package size: | 4600mm*2450mm*1700mm |